Valor Fires 954, Installer And Owner Manual

Page: 45 / 64

16.5 To replace the slider control button.
16.5.1 All models except Brooklyn, Moonlight and Willoughby.
1. Remove the fascia (See section 16.4)
2. Detach the slider control from the fascia by
removing two screws (See figure 44).
3. Detach the control slide button from the slider
control by removing two screws (See figure 45).
4. Replace in the reverse order.
16.5.2 Brooklyn and Moonlight models.
1. Remove the fascia (See section 16.4)
2. Detach the control slide button from the slider
control by removing two screws (See figure 45).
3. Replace in the reverse order.
16.6 To remove the burner unit.
1. Remove the fascia (See section 16.4).
2. Remove the ceramic fuel effect pieces.
3. Support the inlet ‘T’ connector to avoid straining the
pipework and disconnect the appliance from the ‘T’
connector.
4. Detach the burner unit from the hotbox by removing
two screws (See figure 46).
5. Replace in the reverse order.
Page 45
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2010.
Figure 46. Burner attachment points
(Burner detail may differ from that
shown)
Figure 45. Slider button
removal (Detail may
differ from that shown)
Figure 44. Slider control
removal