![Valor Fires 954 Installer And Owner Manual Download Page 57](http://html1.mh-extra.com/html/valor-fires/954/954_installer-and-owner-manual_3263538057.webp)
CLEANING YOUR FIRE
To maintain the high performance and quality finish of your gas fire, please follow
these guidelines:
Before attempting to clean the fire, please remember to turn off the fire and wait for
the appliance to cool completely. The fire will retain heat for some time before
cleaning can begin.
If any pieces of debris are found in the hotbox, have the chimney inspected before
further use.
Metal parts.
Clean the metal parts with a slightly damp cloth and then dry.
Do not use abrasive cleaners as these will scratch the fire surface.
Fascia -
Clean the metal parts with a slightly damp cloth and then dry. Do not use
polish or abrasive materials.
‘Chic’, ‘Envy’ and ‘Westminster’ fascia -
To remove fingerprints from the fascia
apply a very small amount of ‘baby oil’ to a lint free, non-abrasive cloth and wipe over
the surface. Use a clean cloth to wipe off the oil.
Ceramic fuel effect and rear wall.
This product uses fuel effect pieces and a burner compartment rear wall
containing Refractory Ceramic Fibres (RCF), which are man-made vitreous
silicate fibres. Excessive exposure to this material may cause irritation to eyes,
skin and respiratory tract. Consequently, it is important to take care when
handling these articles to ensure that the release of dust is kept to a minimum.
Light coatings of soot will usually be burnt off during the normal operation of the
fire.
Should any soot accumulation become excessive, the fuel effect pieces and rear
wall should be removed from the fire for cleaning.
Cleaning should be carried out in a well ventilated area or in the open air by gently
brushing with the pieces held away from your face so that you avoid inhaling the
dust.
We suggest that you remove the ceramic fuel effect pieces in the reverse order to
that shown in the ceramic fuel effect installer and owner guide.
Burner.
The burner surface can be carefully cleaned to remove any loose particles after
taking off the ceramic fuel effect pieces. Make sure that no particles are pushed into
the burner holes.
Page 57
©
Baxi Heating U.K. Limited 2010.
OWNER GUIDE
Summary of Contents for 954
Page 20: ...Page 20 Baxi Heating U K Limited 2010 INSTALLER GUIDE Figure 7 Pack contents...
Page 21: ...Page 21 Baxi Heating U K Limited 2010 INSTALLER GUIDE Figure 7 Pack contents continued...
Page 22: ...Page 22 Baxi Heating U K Limited 2010 INSTALLER GUIDE Figure 7 Pack contents continued...
Page 64: ...Baxi Heating U K Limited 2010...