Valgrind BBV Quick Start Manual Download Page 282

Page: 282 / 319

README

However: if you contribute code, you need to make it available as GPL
version 2 or later, and not 2-only.

Documentation
~~~~~~~~~~~~~
A comprehensive user guide is supplied.

Point your browser at

$PREFIX/share/doc/valgrind/manual.html, where $PREFIX is whatever you
specified with --prefix= when building.

Building and installing it
~~~~~~~~~~~~~~~~~~~~~~~~~~
To install from the Subversion repository :

0. Check out the code from SVN, following the instructions at

http://www.valgrind.org/downloads/repository.html.

1. cd into the source directory.

2. Run ./autogen.sh to setup the environment (you need the standard

autoconf tools to do so).

3. Continue with the following instructions...

To install from a tar.bz2 distribution:

4. Run ./configure, with some options if you wish.

The only interesting

one is the usual --prefix=/where/you/want/it/installed.

5. Run "make".

6. Run "make install", possibly as root if the destination permissions

require that.

7. See if it works.

Try "valgrind ls -l".

Either this works, or it

bombs out with some complaint.

In that case, please let us know

(see www.valgrind.org).

Important!

Do not move the valgrind installation into a place

different from that specified by --prefix at build time.

This will

cause things to break in subtle ways, mostly when Valgrind handles
fork/exec calls.

The Valgrind Developers

Summary of Contents for BBV



























































































































































































































































































































Search results

Summary of Contents for BBV

Reviews:

Related manuals for BBV

Brands by name

Popular brands

Valgrind BBV, Quick Start Manual

Search results

Summary of Contents for BBV

Reviews:

Related manuals for BBV

Brands by name

Popular brands