Vaisala Veriteq viewLinc 4.0, Administrator'S Manual

Page: 157 / 168

viewLinc 4.0 Administrator Guide 147
over Ethernet (PoE) (Optional) Digi Device 9-30VDC
powered (AC adapter included). Requires transmitter
configured with DB9 serial cable. Requires DB9-serial cable
connection between Digi Device and Transmitter.
Multi-port Digi Device (Ethernet):
Allows multiple PTU300,
HMT330, DMT340 or MMT330 devices to be connect to the
viewLinc host server via standard TCP/IP Ethernet network.
Requires installation of Digi device drivers (included) and
configuration of virtual COM ports on viewLinc host
computer. Allows for multiple PTU300, HMT330, DMT340 or
MMT330 to connect to the host server through a common
TCP/IP network interface module. Digi Device available with
802.3af Power over Ethernet (PoE) (Optional). Digi Device is
9-30VDC powered (AC adapter included) Requires
transmitter configured with DB9 serial cable. Requires DB9-
serial cable connection between Digi Device and Transmitter.
Single port Digi Device (802.11b/g WIFI):
Allows single
PTU300, HMT330, DMT340 or MMT330 device to connect to
the viewLinc host computer via standard 802.11b/g wireless
networks. Requires installation of Digi device drivers
(included) and configuration of virtual COM ports on viewLinc
host computer. Requires transmitter configured with DB9
serial cable. Digi Device is 9-30VDC powered (AC adapter
included)
Multi-port Digi Device (802.11b/g WIFI):
Allows multiple
PTU300, HMT330, DMT340 or MMT330 devices to be
connect to the viewLinc host server via standard 802.11b/g
wireless networks. Requires installation of Digi device drivers
(included) and configuration of virtual COM ports on viewLinc
host computer. Allows for multiple dataloggers to connect to
the host server through common 802.11b/g wireless
networks. Requires transmitter configured with DB9 serial
cable. Digi Device is 9-30VDC powered (AC adapter
included).
Note: PTU300 can only support WLAN-1 and LAN-1
modules when no datalogger modules are
installed.
Q: How do I enable or disable HTTPS?
A: Set the https_port to 0 in the viewlinc.cfg file, or select the
port during installation.