Vaisala Veriteq viewLinc 4.0, Administrator'S Manual

Page: 38 / 168

Chapter 2: Management
28
©
2012 Vaisala Canada Inc
clicking on the lower left
Options
button and selecting
Locations
, you will need to start by adding and configuring
new Zones. This is done by clicking
Options | System
Configuration | Locations | Locations Manager .
From the left
panel, right click on the System folder and click
Add Zone
.
Zones can also be created by:
• manually adding a zone using the menu command
• dragging a device/devices across to the tree and
accepting the option to create zones based on the
device names
Give it a name which describes the zone. Once a zone is
created, you can then add a location to it by right clicking and
selecting
Add Location .
If no devices are displayed in the
device browser, your device may not be connected properly.
• If you use Vaisala Veriteq devices, try discovering devices
- see “Discovering Devices” on page 40.
Organizing Locations into Zones
To organize your viewLinc screen and keep a closer eye on
the locations that matter to you, you can organize your
locations into relevant zones using the Locations Manager.
By default, there is one zone created: System. If you wish to
see recently deactivated locations, click the left Options
dropdown and select the
Show Deactivated checkbox.