64
13-3. Button Operation
The button operation of the timer measurement is as follows.
NOTE: An alarm sounds for 10 seconds when the end of the countdown is
reached. This alarm will sound in all modes. The countdown time is reset to
its starting value automatically when the alarm sounds.
13-4. Stopping the Alarm
Press any button.
14. Using the Alarms (ALM)
The Z1 lets you set up to 5 independent daily
alarms. When turned on, an alarm will sound
for about 10 seconds when it reaches its pre-
set alarm time. This is true even if the Z1 is not
in Watch Mode.
One of the alarms is a snooze alarm. The
snooze alarm will sound every 5 minutes up
to 7 times or until it is turned off . You can also
turn on an Hourly Time Signal, which will cause the Z1 to beep twice every
hour on the hour. The other alarms are one-time alarms.
Press the MODE button 5 times to select the Alarm Mode (ALM) in Watch
Mode or Surface Mode. About 1 second after [ALM] appears on the display,
the display will change to show an alarm name: [AL-1] through [AL-4],
[SNZ] and [SIG], along with an ON/OFF indicator.
14-1. Select Alarm Mode
PLAN
Start
PLAN
Stop
PLAN
(Restart)
(Stop)
PLAN
Stop
ADJUST
Reset
>
>
>
>
Summary of Contents for Z1
Page 1: ...User Manual ...
Page 84: ...84 Please check the time zone of the destination from the map ...
Page 88: ......
