Uwatec Z1, User Manual

Page: 16 / 88

16
4-7. Power Saving
The Power Saving function, when activated, allows the Z1 to automati-
cally enter a sleep state when it is left in a dark area for a period of time
between 10:00PM and 6:00AM. The following table shows how the Z1 func-
tions are aff ected by Power Saving.
Power Saving
Levels
Elapsed Time Operational Status
(Sleep State)
Level 1
After 1 hour in the dark
between
10 PM & 6 AM
• Display: Off
• Sensors: Disabled
• Clock & Alarms: Enabled (in back-
ground)
• Ongoing Desat Calculations:
• Continue Unimpeded
(Sleep State)
Level 2
After 6-7 days at Level 1
• Display: Off
• All Functions: Disabled
• Alarms: Disabled
• Clock: Enabled (in background)
To recover from the sleep state:
•
Press any button.
• Move the Z1 to a well-lit area.
• Tilt the Z1 at an angle, as if for reading.
NOTE: When wearing the Z1, if the solar panel display is hidden beneath a
shirt or jacket sleeve it may enter the Power Saving state.
More on Power Saving:
•
The Z1 will not enter a sleep state while it is in Dive Mode, Stopwatch
Mode or Countdown Timer Mode.
• The Power Saving function can be set to ON or OFF.
Ref: Power Saving function • • • P.28
• Sensor operation will continue for 48 hours after diving, even at Power
Saving level 1.
Current mode Displayed alarms
Watch Mode or Surface Mode [CHG] will blink
Dive Mode
[WARNING!!BATT] will scroll from right to left 5
times, and [M] on the lower side of the display
will blink. Alarm will be on for 6 seconds.
[WARNING!! BATT] will be re-shown every minute.