Uwatec Z1 User Manual Download Page 19

Page: 19 / 88

LIGHT/LOG button

PLAN button

Press the LED/LOG button to activate the backlight. Press-and-hold this
button while in Watch Mode to switch to Log Mode.

Ref: To display the Dive Log

• • • P.44

Ref: Automatic Light-Up (Auto Light) • • • P.67

NOTE: When set to Auto Light, the backlight turns on frequently and the
capacity of the rechargeable battery decreases quickly.

From Watch Mode, you can switch to Dive Mode manually by pressing and
holding the LED/LOG and the PLAN button simultaneously for about 2 sec-
onds.

Ref: • • • P.35

From Dive Mode, by pressing and holding the LED/LOG plus PLAN buttons
again you can switch to the Freedive Mode.

Ref: • • • P.68

And by pressing and holding the LED/LOG plus PLAN buttons for about
2 seconds yet again, you return to Watch Mode.

Press this button from Watch Mode to switch directly to Plan Mode.

Ref: To display Plan Mode • • • P.52

Summary of Contents for Z1

























































































Search results

Summary of Contents for Z1

Reviews:

Related manuals for Z1

Brands by name

Popular brands

Uwatec Z1, User Manual

Search results

Summary of Contents for Z1

Reviews:

Related manuals for Z1

Brands by name

Popular brands