68
17. Illumination
The Z1’s display screen is illuminated for easy reading in the dark. The light
function can be set for manual operation, or you can set the Auto Light
function which activates the backlight by tilting your arm in the dark, using
the Z1’s ambient light sensor.
17-1. Manual Activation
When the LED/LOG button is pressed in any of the primary modes, the
backlight lights up. (This includes Dive Mode.)
NOTE: When an alarm sounds while the backlight is illuminated, the light
will immediately turn off . Also, the backlight is disabled while confi guring
mode settings.
16. Display of Solar Charge (SLR)
The Z1 lets you check the status of its solar charge. You can also see the
estimated time it will take to reach full charge at the current charging rate,
based on the amount of available light. However, this is just an estimate
and should be used as a reference only.
Display Screen Contents
•
Current charging amount: the amount of
light (0 to 1000) when the solar charge is
set to a maximum of 1000.
•
SLR: Sorter Title of Display Mode of Solar
charging amount.
•
Estimated Charging Time: A rough estimate
of the time (0 to 999 hours) until the battery reaches a high level of
charge.
•
Indicator: The fl ash speed changes according to the current amount.
The fl ash has no display when it has no charge.
Button Operation
By pressing the PLAN button the Z1 provides an updated re-calculation
within 1 minute from the moment you press the button.
NOTE: The Z1 returns to Watch Mode if no re-measurements are done
after 1 minute.
Summary of Contents for Z1
Page 1: ...User Manual ...
Page 84: ...84 Please check the time zone of the destination from the map ...
Page 88: ......
