26
6-4. Set Button Operation Sound
When the button function audible signal is set to ON, every time you press
the button an audible signal will sound, indicating the button press was
successful. When this function is turned OFF, button operation is silent.
The factory default for this button function is ON.
How to Set
1. In Watch Mode or Surface Mode, press-and-hold the ADJUST button
for about 2 seconds. [SET] [Hold] fl ashes and [CITY] appears for about
1 second, followed by the city code and the city name which will scroll
in the upper right hand corner of the screen.
2. Press the MODE button 9 times, bringing you to the screen where
[key
♪
] or [MUTE] is displayed.
3. Press the PLAN button to select [key
♪
] (for sound) or [MUTE] (no
sound).
NOTE: This setting aff ects only sounds resulting from pressing the
control buttons. Alarm sounds, time signals, timer sounds, and warn-
ing sounds will all still be active, even if the button operation sound
function is turned to MUTE.
4. Press the ADJUST button to save the setting and return to Watch Mode
or Surface Mode. Or, you can press the MODE button to move to the
next setting in the series, which is Backlight Duration.
Summary of Contents for Z1
Page 1: ...User Manual ...
Page 84: ...84 Please check the time zone of the destination from the map ...
Page 88: ......
