Uwatec Z1, User Manual

Page: 51 / 88

51
9-6. Oxygen Uptake/ppO
2
Profi le Saving Setting
The Z1 allows you to select whether or not you
want to store the oxygen uptake/ppO
2
data as
part of in dive profi le data. [OFF] is the default
setting, which means “do not store” 0
2
data.
Profi le data commonly includes nitrogen up-
take, warnings and O
2
% data at the time of gas
switching, so when O
2
uptake and ppO
2
data is
being saved, N
2
and O
2
uptake and ppO
2
data
will be stored alternately, and the amount of
information on N
2
uptake will be cut in half. (Parts without data are com-
plemented and displayed.)
How to Set
1. When dive Log data is displayed, press-and-hold the ADJUST button
for about 2 seconds to switch to the sampling rate setting screen.
2. Press the MODE button to switch to the oxygen uptake/ppO
2
profile
saving display.
3. Press the PLAN button to change the setting.
4. Press the ADJUST button to save the setting.
9-7. Checking the Dive Profi le
1. Go to Log Mode.
In Watch Mode or Surface Mode, press-and-hold the LED/LOG button
for about 2 seconds. [LOG] appears on the screen, and the Z1 switches
to Log Mode after about 1 second.
NOTE: In Log Mode, the latest logged dive is displayed.
2. Every time the LED/LOG button is pressed, it displays the newest dive
in the log. Each time you press the PLAN button, the oldest dive is
displayed. Press-and-hold the LED/LOG button or the PLAN button to
fast-forward through all the dives.
NOTE: Between the oldest dive and the newest dive you will fi nd the dive
history.
Ref: Display of dive history • • • P.43
3. To display the logged dive you want to review, press the MODE button.
[PROF] is displayed on the screen and the profi le screen is displayed
about 1 second later. It displays the dive profi le from start to fi nish with
a 1-second sampling rate.