Uwatec Z1 User Manual Download Page 32

Page: 32 / 88

6-10. Set Auto Light

The Z1 oﬀ ers an Auto Light function that enables the backlight to activate
without manually pressing the LED/LOG button.

NOTE: The default position for the Auto Light function is OFF.

How to Set

1. In Watch Mode or Surface Mode, press-and-hold the ADJUST button

for about 2 seconds. [SET] [Hold] ﬂ ashes and [CITY] appears for about
1 second, followed by the city code and the city name which will scroll
in the upper right hand corner of the screen.

2. Press the MODE button 15 times. (If you are using TYO [TOKYO] as your

Home City setting, press the MODE button 13 times.) [LT] and ON or
OFF will start blinking.

3. Press the PLAN button to select ON to activate the Auto Light setting.

4. Press the ADJUST button to save the selection and return to Watch

Mode or Surface Mode.

Summary of Contents for Z1

























































































Search results

Summary of Contents for Z1

Reviews:

Related manuals for Z1

Brands by name

Popular brands

Uwatec Z1, User Manual

Search results

Summary of Contents for Z1

Reviews:

Related manuals for Z1

Brands by name

Popular brands