Uwatec Z1, User Manual

Page: 29 / 88

29
6-7. Set Units of Measure
NOTE: This setting can be programmed only when using a Home City other
than TYO (TOKYO).
How to Set
1. In Watch Mode or Surface Mode, press-and-hold the ADJUST button
for about 2 seconds. [SET][Hold] fl ashes and [CITY] appears for about
1 second, followed by the city code and the city name which will scroll
in the upper right hand corner of the screen.
2. Press the MODE button 12 times, [ft] or [m], and a smaller [ºF] or [ºC],
start to blink.
3. Press the PLAN button to select [ft] or [m].
4. Press the LED/LOG button to select [ºF] or [ºC].
5. Press the ADJUST button to save the selections and return to Watch
Mode or Surface Mode. Or, you can press the MODE button to move to
the next setting in the series, which is choosing the MMDD/DDMM dis-
play.