Uwatec Z1 User Manual Download Page 65 | Manualshive

Page: 65 / 88

background image

65

14-2. To Set an Alarm Time

1. In the Alarm Mode, press the PLAN button to scroll through the alarm

screens until the one you want to set is displayed. (There is no time
setting for the hourly time signal.)

2. Press the ADJUST button until [SET] [Hold] appears on the display and

the current setting starts to blink.

3. Press the MODE button to shift the blinking between the hour and min-

ute settings.

4. Use the PLAN and LED/LOG buttons to select alarm times.

•

Press-and-hold the PLAN or LED/LOG button to fast-forward
through the selection.

•

When setting the alarm time using the 12-hour format, take care to
set the time correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press the ADJUST button to save your setting.

6. Press-and-hold the MODE button (about 2 seconds) to return to Watch

Mode or Surface Mode.

NOTE: Setting an alarm time causes that alarm to turn on automatically.
If you do not take any action for 2 to 3 minutes while in the setting screen,
the alarm-set process will automatically end. In such a case, the alarm
that was set would be turned on.

14-3. Turning an Alarm and the Hourly Time Signal On and Off

1. In the Alarm Mode, use the PLAN button to select an alarm or the hour-

ly time signal.

2. Once the alarm or hourly time signal is selected, press the ADJUST but-

ton to turn it ON and OFF. When 1 or more of the 4 alarms are turned
on, the alarm icon lights up. (The icon will not be lit if the snooze alarm
and hourly report are turned on. )

AL-1

AL-2

AL-3

AL-4

SNZ

SIG

PLAN

→

PLAN

→

←

PLAN

←

PLAN

PLAN

↓

↑

PLAN

«
...
63
64
65
66
67
...
»

Summary of Contents for Z1

























































































Reviews:

No comments

Related manuals for Z1

Brand: Keithley Pages: 48

Brand: S.E. International Pages: 30

Brand: SZBJ Pages: 2

Brand: Vaisala Pages: 40

Brand: ProsKit Pages: 10

Brand: TQC Sheen Pages: 16

Brand: Feature tech Pages: 2

Precision KMS7101

Brand: Kreg Pages: 16

Brand: Laser Technology Pages: 80

Brand: Novus Pages: 52

Brand: Rockler Pages: 4

Brand: Hammerhead Pages: 44

Brand: NARDA Pages: 60

Brand: OHAUS Pages: 64

Brand: Würth Pages: 28

Brand: Benetech Pages: 16

Brand: MetLogix Pages: 30

Energy Tech 401

Brand: CODEL Pages: 131

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands