Uwatec Z1, User Manual

Page: 20 / 88

20
6. Setting Your Z1
IMPORTANT
Before making any other settings on your Z1 you must fi rst set your Home
City.
1. In Watch Mode or Surface Mode, press-and-hold the ADJUST button
for about 2 seconds. [SET] [Hold] fl ashes and [CITY] appears for about
1 second, followed by the city code and the city name which will scroll
in the upper right-hand corner of the screen.
Select your city code and city name by pressing the LED/LIGHT or PLAN
button.
Ref. Confi guring your Home City • • • P.22
2. Once your Home city is set, press the MODE button to begin the set
cycle. Each time you press the MODE button, the setting items appear
in the following order:
Home City > (1) Daylight Saving Time > (2) 12/24-Hour > (3) Second
> (4) Hour > (5) Minute > (6) Year > (7) Month > (8) Day > (9) Button
Operation Sound > (10) Backlight Duration > (11) Power Saving >
(12) Unit of Measure > (13) MMDD/DDMM > (14) Main display of Dive
Mode > (15) Auto Light.
NOTE: The above numbers in ( ) indicate the number of times the MODE
button must be pressed to reach each setting from the start position.
Ref.
Setting Daylight Saving Time
• • • P.22
Setting 12/24-Hour • • • P.24
Setting Time & Date • • • P.25
Setting button operation sound • • • P.26
Setting backlight duration • • • P.27
Setting Power Saving • • • P.28
Setting Unit of Use • • • P.29
Setting MMDD/DDMM • • • P.30
Setting main display of Dive Mode • • • P.31
Setting Auto Light
• • • P.32