UTT Technologies
Chapter 10 VPN
http://www.uttglobal.com
Page
13113113
•
None:
It means that no authentication is performed.
•
Either:
It means that the Gigabit Router will automatically negotiate it with the
remote VPN appliance.
Remote Subnet IP:
It specifies the subnet IP address of the remote network. In most
cases, you may enter the IP address of the remote VPN appliance’s LAN interface.
Remote Subnet Mask:
It specifies the subnet mask of the remote network.
Tunnel Server IP/Domain Name:
It specifies the IP address or domain name of the
remote PPTP/L2TP server. In most cases, you may enter the WAN IP address or
domain name of the remote VPN appliance.
Save:
Click to save your changes.
Cancel:
Click to revert to the last saved settings.
Back:
Click to go back to the
PPTP Client List
.
9.3 PPTP Client List
After you have configured a PPTP/L2TP client entry, you can view its configuration and
status in the
PPTP Client List
, see Figure 9-6.
Figure 9-6 PPTP Client List
Figure 9-7 PPTP Client List (Continue)
After the Gigabit Router has successfully established a PPTP tunnel with the remote
