http://www.uttglobal.com
Page 14
UTT Technologies
Chapter 2 Hardware Installation
/
www.argo-contar.com
need to select a proper location to install the Gigabit Router. In most cases, you can install
it on a level surface such as a desktop or shelf.
Note
Please ensure that the desktop or shelf is stable and the power outlet is grounded
properly, and do not place heavy objects on the Gigabit Router.
2. Connecting the Gigabit Router to the LAN
Connect a standard network cable from a PC or switch to a LAN port of the Gigabit Router,
or connect a PC to the Gigabit Router wirelessly. The Gigabit Router will automatically
adapt to any network device operating at 10Mbps or 100Mbps.
3. Connecting the Gigabit Router to the Internet
Connect the network cable provided by the manufacturer from the DSL, cable or fiber
optic modem to a WAN port of the Gigabit Router, or insert your 3G USB modem to the
USB port of the Gigabit Router.
4. Powering On the Gigabit Router
Connect the supplied power cord to the power connector on the rear panel of the Gigabit
Router, and then plug the other end of the power cord to a grounded power outlet. The
Gigabit Router will start automatically.
Note
To prevent the Gigabit Router from working abnormally or being damaged, please
make sure that the power supply and connectivity are normal, and the power outlet is
grounded properly before powering on the Gigabit Router.
5. Checking the LEDs
Verify that the Gigabit Router starts up properly and the network connections are
operational
by
checking
the
LED
states,
as
described
in
Table
2-1.
