UTT Technologies
Chapter 9 Firewall
http://www.uttglobal.com
Page
1121121
8.1.3.1 Access Rule Settings - IP Filtering
Figure 8-4 Access Rule Settings - IP Filtering
Name:
It specifies a unique name of the access rule.
Enable:
It allows you to enable or disable the access rule. The default value is
checked, which means the access rule is in effect. If you want to disable the rule
temporarily instead of deleting it, please clear the check box.
Source IP Range:
It specifies a range of source IP addresses (i.e., a group of local
computers) to which the access rule applies. To specify a single local computer, enter
its address in both text boxes.
Prority:
It specifies the priority of the access rule. The access rules will be checked
against the packets in descending order of priority.
It must be between 0 and 100. The
smaller the number, the higher the priority. And the priority of each access rule cannot
