UTT Technologies
Chapter 5 Network
http://www.uttglobal.com
Page
3131
Figure 5-2 Internet Connection List (Continue)
5.1.1.1 Parameter Definitions
Interface:
It displays the name of the WAN interface. The Gigabit Router has four
WAN interfaces: WAN1, 3G, and APClient. Therein, WAN1 are wired interfaces, and
3G and APClient are wireless interfaces.
Connection Type:
It displays the type of the Internet connection. There are four
connection types: Static IP, PPPoE, DHCP and 3G.
Status:
It displays current status of the connection. There are four cases:
1. PPPoE Connection Status
For the PPPoE connection, there are two kinds of status, see Table 5-1. When it is
connected, it will also display the elapsed time (days: hours: minutes: seconds) since
connected.
Status
Description
Disconnected
The connection is disconnected due to that the interface is disabled or
not connected, or the Gigabit Router doesn’t dial up yet, or wrong user
name or password, etc.
Connected
Authentication succeeded, and the connection is established and ready
for data transmission.
Table 5-1 Description of PPPoE Connection Status
2. Static IP Connection Status
For the static IP connection, there are two kinds of status, see Table 5-2.
Status Description
