UTT Technologies
Chapter 7 Advanced
http://www.uttglobal.com
Page 82
Note
When you add the IP/MAC address pair of the computer that you use to administer
the Gigabit Router into the
IP/MAC Binding List
, please leave the
Allow
check box
checked. Otherwise you cannot access the Gigabit Router from that computer. If you
attempt to clear the check box, you will be prompted that the operation is not
permitted, see the following figure.
Figure 6-13 IP/MAC Binding Error Message
6.2.4 IP/MAC Binding Settings
Figure 6-14 IP/MAC Binding Settings
Subnet:
It specifies the subnet you want to scan. The default is the Gigabit Router’s
LAN IP address and subnet mask.
Scan:
If you click the
Scan
button, the Gigabit Router will immediately scan the
specified subnet to detect active computers connected to the Gigabit Router, learn
and display dynamic ARP information (that is, IP and MAC address pairs) in the text
