UTT Technologies
Chapter 10 VPN
http://www.uttglobal.com
Page
20020020
AES256 algorithm, ESP authentication with SHA algorithm and AH authentication
with MD5 algorithm.
By default, the UTT VPN gateway provides one phase 2 proposal by the parameter
P2
Encrypt/Auth Algorithms 1
(default value is esp-3des) in the Web UI. In addition, it
allows you to choose up to four phase 2 proposals in the Web UI, and twelve phase 2
proposals in the CLI.
9.5.3 IPSec List
Figure 11-27 IPSec List
After you have finished configuring an IPSec entry, you can view its configuration and
status information in the
IPSec List
, see
Figure 11-27 IPSec List
. The parameter
definitions are as follows:
ID:
It is used to identify each IPSec tunnel in the list.
Enable:
Enable or disable the IPSec tunnel. The box is checked by default. You can
disable the IPSec tunnel by checking off the box.
SA Status:
It displays the current status of the IKE SA and IPSec SAs. There are four
kinds of status, see
Table 11-2 Description of IPSec SA Status.
.
Status Description
