UTT HiPER 840G Advanced Configuration Manual Download Page 26

Page: 26 / 212

http://www.uttglobal.com

Page 19

UTT Technologies

Chapter 4 Start Menu

www.argo-contar.com

3.3 Setup Wizard

This section describes the

Start > Setup Wizard

page.

3.3.1 Running the Setup Wizard

As mentioned earlier, the first page of the

Setup Wizard

appears immediately after your

first login, see the following figure.

Figure 3-4 Running the Setup Wizard

Do Not Automatically Launch the Wizard Again:

If you select this check box, the

system don’t automatically launch the

Setup Wizard

the next time you login to the

Gigabit Router, instead directly open the

Welcome

page shown in Figure 3-5. Else,

the system will still launch the

Setup Wizard

automatically.

Exit Wizard:

Click to exit the

Setup Wizard

and go to the

System > System

Information

page (see Figure 3-5). The changes made in the

Setup Wizard

will be

discarded.

Next:

Click to go to the next page of the

Setup Wizard

, that is, the

Setup Wizard -

WAN1

Settings

page

shown

错误！未找到引用源。

Summary of Contents for HiPER 840G





















































































































































































































Search results

Summary of Contents for HiPER 840G

Reviews:

Related manuals for HiPER 840G

Brands by name

Popular brands

UTT HiPER 840G, Advanced Configuration Manual

Search results

Summary of Contents for HiPER 840G

Reviews:

Related manuals for HiPER 840G

Brands by name

Popular brands