Appendix A: Configuration presets
94
ZP1-X3E Series Installation Manual
Preset
ON status
Output
Delay
80
Fire routing ON
1
No
2
No
3
No
4
No
90
Fire Sounders ON
1
No
2
No
Extinguishing sounders ON [4]
3
No
4
No
91
Fire Sounders ON
1
No
2
No
3
No
4
No
92
Extinguishing sounders ON
1
No
2
No
3
No
4
No
96
Extinguishing activation sounders ON
[3]
1
No
2
No
Extinguishing released sounders ON
[3]
3
No
4
No
[1] Fail-safe mode (output is active when there is no fault).
[2] Faults and disable options are linked to the expansion board indications.
[3] Not considered to signal supervision faults and linked to the expansion I/O indications.
[4] Faults are signaled in the Extinguishing Sounders LED. Output activates continuously and the
tone (for activation or released) has to be provided and configured in the sounder device.
EN 54-13 supervision and Class A expansion board
outputs
Note:
The following presets are available for installations that use
EN 54-13 supervision (the SU setting is A). See “Supervision mode” on page 33
for more information.
Table 45: Expansion board functions (EN 54-13, Class A outputs)
Preset
ON status
Output
Delay
05
Z1 alarm
1
Yes
2
Yes
Z2 alarm
3
Yes
4
Yes
