Utax CD 1435 User Manual Download Page 96

Page: 96 / 250

FAX Operation (Advanced)

4-28

Cancelling the Setting of RX/Forward Requirements

To cancel the memory forwarding, follow the steps below.

Press the

System Menu

key.

Press [FAX] and then [Next] of

RX/Forward

Requirements

Press [Off] and then [OK].

Forwarding Detail Settings

With the forwarding settings, you can change the following detail settings.

Activating Time Setting

Specify the times when the preset requirements are activated and deactivated.

Follow steps 1 to 3 of

Using Requirements for All

Receptions on page 4-20

Follow steps 1 to 3 of

Using Rule for Specific RX on

page 4-22

Select the requirement and press [Detail].

Press [Change] of

Activating Time

Select [All Day] or [Preset Time].

To forward received originals all day, select [All
Day], press [OK] and then go to step 5.

To set the forwarding time, select [Preset Time] and
go to the next step.

Press [+]/[-] to enter

Start

Time and

End

Time, and

then press [OK].

NOTE:

Enter the time on the 24 hours system.

Priority Setting

Set the priority of a registered forwarding requirement.

Follow steps 1 to 3 of

Using Rule for Specific RX on

page 4-22

Select the requirement and press [Detail].

Press [Change] of

Priority

Press [+] or [-] or use the numeric keys to enter the
priority.

Press [OK].

Requirement: - Activating Time

Specify the time for activating the requirements.

Print or forward the faxes received during the preset

time according to the requirements.

Cancel

All Day

Preset Time

Start

End

10/10/2010 10:10

Status

Summary of Contents for CD 1435



























































































































































































































































Search results

Summary of Contents for CD 1435

Reviews:

Utax CD 1435, User Manual, Page: 96 / 250

Search results

Summary of Contents for CD 1435

Reviews: