Utax CD 1435 User Manual Download Page 141

Page: 141 / 250

Checking Transmission Results and Registration Status

5-5

Storing Job Log Screen

NOTE:

Jobs stored in a Polling box appear as scanner (

) job types.

Checking Details of the Job Log

You can check the detailed information of each job.

Displaying Details of the Job Log

Press the

Status/Job Cancel

key.

Press any of [Printing Jobs], [Sending Jobs] or
[Storing Jobs]. Then press [Log].

Select the job to check, and press [Detail].

Detailed information of the selected job is
displayed.

Display / Key

Description

Job No.

Job acceptance number

End Date

Job completed date

Type

Icon indicates job type.

Storing fax reception data

Storing i-FAX reception data

Job Name

Job name

User Name

User name
Blank if no information is available

Result

Result is indicated.
Completed: Job ended properly.
Canceled: Job was canceled.
Error: Job ended improperly due to error.

[

] in

Job Type

Specific type of job can be indicated.

[Detail]

Select a job from the list and press this key to show
detailed information of the job (Refer to

Checking

Details of the Job Log on page 5-5

Detail Job No.:

Job No.:

Result/Destination:

Job Type:

Destination:

User Name:

Job Name:

Start Time

1/2

Sending Job - FAX

Processing

000080

User1

ABCDE

doc2008101005151

10:10:10

000080

Detail

10/10/2010 10:10

Status

Summary of Contents for CD 1435



























































































































































































































































Search results

Summary of Contents for CD 1435

Reviews:

Utax CD 1435, User Manual, Page: 141 / 250

Search results

Summary of Contents for CD 1435

Reviews: