Utax CD 1435 User Manual Download Page 124

Page: 124 / 250

FAX Operation (Advanced)

4-56

Printing from a Polling Box

Use this procedure to print an original stored in a Polling box.

Press the

Document Box

key.

Press [FAX Box], and then [Polling Box].

Select an original by pressing a checkbox in the list.
A tick appears in the checkbox for the selected
original.

NOTE:

To cancel a selection, press the checkbox

again so that it is no longer ticked.
To check the image of the originals, refer to the preview.
For information on previewing images, refer to

Previewing Images on page 4-59

For information on working with lists in a Polling box,
refer to the machine’s

Operation Guide

Press [Print].

When the printing confirmation screen appears,
press [Yes]. Printing begins.

File Name

Detail

Date and Time

Delete

Size

1/1

0001

doc20101010094533

10/10/2010

Polling Box

doc20101010095022

10/10/2010

doc20101010100011

Preview

Store File

10/10/2010

Status

Search(Name)

Summary of Contents for CD 1435



























































































































































































































































Search results

Summary of Contents for CD 1435

Reviews:

Utax CD 1435, User Manual, Page: 124 / 250

Search results

Summary of Contents for CD 1435

Reviews: