Utax CD 1435 User Manual Download Page 103

Page: 103 / 250

FAX Operation (Advanced)

4-35

Forwarding Settings

FAX/i-FAX > Common > RX/Forward Requirements > Requirement List > Add > Forward

Use this page to select forwarding destinations.

The settings available on the Forward page are shown below.

After completing the settings, click

Submit

to save the settings.

Item

Description

Name

Displays the condition name.

Status

Displays whether the condition is currently used.

Forwarding

Specifies whether to forward.

File Format

Choose either PDF, PDF/A or TIFF as the file format used
for storing forwarded files.

FTP Encrypted TX

Turn

to enable encryption for transmission. Note the

SSL

protocol must also be turned on.

Subject Additional
Information

When a forwarding address is specified as destination,

Sender Name

Sender FAX No./ Address

is appended

at forwarding. When None, these will not be appended.

Page Separate

Choose whether pages are separated when faxes are
forwarded to a computer.

Number of Destination

Displays the number of registered destinations displayed
for the next item.

Destination List

Specifies the FAX box to be used. When the selection
button is clicked, a list of registered FAX boxes appears.
For how to add a FAX box, specify the settings below.
• Add(Refer to Editing Destinations on page

4-36

• Import Contacts
• Import Groups
• Delete

Summary of Contents for CD 1435



























































































































































































































































Search results

Summary of Contents for CD 1435

Reviews:

Utax CD 1435, User Manual, Page: 103 / 250

Search results

Summary of Contents for CD 1435

Reviews: