manualshive.com logo in svg

Utax CD 1435, User Manual, Page: 143 / 250

Share
Download
Utax CD 1435 User Manual Download Page 143

Checking Transmission Results and Registration Status 

5-7

5

Printing Administrative Reports

You can print various administrative reports to check the results of fax transmission or the status of the functional 
setup.

Send Result Reports

Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also 
print the transmitted image in the send result report.

1

Press the 

System Menu

 key.

2

Press [Report], and [Next] of 

Result Report Setting

. 

Then press [Next] of 

Send Result Report

 and 

[Change] of 

FAX

.

3

Press [Off] (not to print), [On] (to print), or [Error 

Only].

If you selected [On] or [Error Only], you should then 

indicate whether the transmitted image is to be 

attached by selecting [Off] (do not print transmitted 

image), [Partial Image] (print transmitted image at 

full size) or [Full Image] (print all of the transmitted 

image).

4

Press [OK].

Report for Job Canceled before Sending

Print a send result report when the job is canceled before being sent.

1

Press the 

System Menu

 key.

2

Press [Report], [Next] of 

Result Report Setting

,  

[Next] of 

Send Result Report

 and then [Change] of 

Canceled before Sending

.

3

Press [Off], [On].

4

Press [OK].

Status

Report - FAX

Cancel

OK

10/10/2010

Error Only

Print a report of FAX transmission results.

* Results including E-mail/Folder in multiple destinations are also printed.

Partial Image

Off

Off

On

Attach Image

Full Image

Send Result Report

Completed

With transmitted image 

Completed

Send Result Report

Without transmitted image 

Summary of Contents for CD 1435



























































































































































































































































Reviews:

No comments