manualshive.com logo in svg

Utax CD 1435, User Manual, Page: 148 / 250

Share
Download
Utax CD 1435 User Manual Download Page 148

Checking Transmission Results and Registration Status 

5-12

Confirmation Screen of Destinations

When selecting [On] for Dest. Check before Send, the confirmation screen of destinations appears after 
pressing the 

Start

 key. For details, refer to 

Confirmation Screen of Destinations in the Operation Guide

 for the 

machine.

Follow the steps below to confirm the destinations.

1

Press [

] or [

] to confirm every destination.

Press [Detail] to display the detailed information on 
the selected destination.

To delete the destination, select the destination you 
want to delete and press [Delete]. Press [Yes] in the 
confirmation screen. The destination is deleted.

To add the destination, press [Cancel] and then 
return to the destination screen.

2

Press [Check].

NOTE: 

Be sure to confirm every destination by 

displaying them on the touch panel. You cannot press 
[Check] unless you have confirmed every destination.

3

Press the 

Start

 key to start sending.

Check

Cancel

Status

10/10/2010  10:10

Destination

Detail

Delete

Destination

Detail

A OFFICE

1234567890

Check the destination list through the last page.
After checking the list, press [Check] and then Start key.

Status Admin

1/1

Summary of Contents for CD 1435



























































































































































































































































Reviews:

No comments