Utax CD 1435 User Manual Download Page 210

Page: 210 / 250

About Network FAX

9-4

Setup

The following preparation is needed before using Network FAX.

Flow of Setup

Connection to a PC

Connect the machine to a PC using the network cable. For details, refer to the machine’s

Operation Guide

Machine Registration

Using the memory transmission function, select the recipient PC or file format.

NOTE:

Use the memory transmission function to forward the received fax to the PC or forward it as an e-mail

attachment. For details, refer to

Printing/Sending Received Faxes by Requirements (Memory Forwarding) on

page 4-18

Installing Software on the PC

Install the dedicated software (included in the supplied DVD) on your PC required to use Network FAX. For
details, refer to the

Network FAX Driver Operation Guide

(Online Manual) contained in the included DVD.

Basic Transmission

Create the document to be sent.

Use an application on your computer to create
the document to be sent.

Select [Print] from the File menu. The Print
dialog box for the application that you are
using will appear.

Select settings in the Print dialog box.

Select the product name of the machine to be
used in the printer name list.

Set the print range and other settings.

NOTE:

Make sure that the number of copies is set to

1. The following screen is an example. The actual
dialog box will vary depending on the application that
you are using.

Click [Properties] to open the Properties
window.

Summary of Contents for CD 1435



























































































































































































































































Search results

Summary of Contents for CD 1435

Reviews:

Utax CD 1435, User Manual, Page: 210 / 250

Search results

Summary of Contents for CD 1435

Reviews: