manualshive.com logo in svg

Utax CD 1435, User Manual, Page: 101 / 250

Share
Download
Utax CD 1435 User Manual Download Page 101

FAX Operation (Advanced) 

4-33

4

Forward Settings

FAX/i-FAX > Common > RX/Forward Requirements > General

Specify the forward settings.

The settings available on the Forward page are shown below.

After completing the settings, click 

Submit

 to save the settings.

Forward Settings

FAX/i-FAX > Common > RX/Forward Requirements > Requirement List > Add

Specify the Requirement List settings.

The settings available on the Requirement List -Add page are shown below.

Item

Description

Off

Disables the forwarding process. Received faxes are 
printed on paper as in normal operation.

Use Requirements List

Executes the forwarding process according to the 
specified conditions. (For the setting procedure, refer to 
Print Settings on page 

4-34

.)

All

Executes the forwarding process without specifying 
conditions. All received faxes are processed in the same 
way. However, the process of saving them in a FAX box 
cannot be selected. (For the setting procedure, refer to 
Print Settings on page 

4-34

.)

Item

Description

Requirement Number

Enter a number that identifies the condition set.

Name

Give the condition set here an easily recognizable name.

Status

Specify whether to enable or disable the condition.

Activating Time

Specifies whether a time is specified.

Enable Time

Registers times when the specified requirements are 
enabled or disabled. You can register any time between 
00:00 and 23:59.

File Name

Sets the name of the file created when a fax is forwarded.

Additional Information

Appends information such as the date/time, job number 
and destination address to the file name.

Add Sender Information

Sets the position appended in the additional information. 
The additional information consists of the local FAX 
number for a FAX transmission and the e-mail address of 
this machine in the case of an i-FAX transmission.

Summary of Contents for CD 1435



























































































































































































































































Reviews:

No comments