manualshive.com logo in svg

Utax CD 1435, User Manual, Page: 213 / 250

Share
Download
Utax CD 1435 User Manual Download Page 213

About Network FAX 

9-7

9

Network FAX Driver Operation Guide (Online Manual)

The 

Network FAX Driver Operation Guide

 (Online Manual) is contained in the included DVD in PDF (Portable 

Document Format). The main contents include the following.

• Installing Network FAX Driver
• Performing Network FAX Sending
• Specifying the Network FAX Transmission Settings
• Specifying the Cover Letter Settings

Opening the Online Manual

Follow the steps below to refer to the online manual.

1

Insert the DVD supplied with the machine into the 
DVD drive. An explanation of the licensing 
agreement is displayed. If you agree to the terms of 
the agreement, click 

Accept

. The main menu 

screen then appears.

2

Click 

Software Documentation

, and then 

Network FAX Driver

. The online manual appears.

NOTE: 

Adobe Acrobat Reader 8.0 or later needs to be 

installed to view the online manual.

Summary of Contents for CD 1435



























































































































































































































































Reviews:

No comments