Utax CD 1435 User Manual Download Page 104

Page: 104 / 250

FAX Operation (Advanced)

4-36

FAX Box Settings

FAX/i-FAX > Common > RX/Forward Requirements > Requirement List > Add > Save to FAX Box

Use this page to select forwarding destinations.

The settings available on the Forward page are shown below.

After completing the settings, click

Submit

to save the settings.

Editing Destinations

FAX/i-FAX > Common > RX/Forward Requirements > Requirement List > Add > Forward > Add

Use this page to edit destinations.

The settings available on the Forward - Edit page are shown below.

If you selected

E-mail

as the destination type, specify the settings below.

• E-mail

If you selected

SMB

FTP

as the destination type, specify the settings below.

• Host Name
• Port number
• Path
• Login User Name
• Login Password

Item

Description

Name

Displays the condition name.

Status

Displays whether the condition is currently used.

Save to FAX Box

Specifies whether to save faxes in a FAX box.

Box Name

Specifies the FAX box to be used.

Item

Description

Address Type

Select the destination type.
• E-mail
• SMB
• FTP
• FAX
• i-FAX

Summary of Contents for CD 1435



























































































































































































































































Search results

Summary of Contents for CD 1435

Reviews:

Utax CD 1435, User Manual, Page: 104 / 250

Search results

Summary of Contents for CD 1435

Reviews: