Utax CD 1435 User Manual Download Page 172

Page: 172 / 250

Setup and Registration

6-24

Press [Delete]. When the deletion confirmation
screen appears, press [Yes].

To change or delete other Permit FAX numbers,
repeat steps 2 to 6.

Press [Close].

Registering Reject FAX No.

NOTE:

Up to 50 Reject FAX numbers can be registered.

Press the

System Menu

key.

Press [FAX], [Next] of

TX/RX Restriction

and then

[

Add

/Edit] of

Reject No. List

Press [Add].

Use the numeric keys to enter Reject FAX No. Up
to 20 digits can be entered.

NOTE:

Press [Pause] to insert a pause (-) between

numbers.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
Pressing [Backspace] deletes the character to the left of
the cursor.

Press [OK].

To register other Reject FAX numbers, repeat steps
3 to 5.

Press [Close].

FAX - Reject No. List

TEL Number

(Up to 50 numbers can be registered.)

Add

Detail

Delete

1/1

10/10/2010 10:10

Status

55555555555

Use the numeric keys to enter a number.

Cancel

FAX - Reject No.

987654321

Pause

Backspace

Space

10/10/2010 10:10

Status

Summary of Contents for CD 1435



























































































































































































































































Search results

Summary of Contents for CD 1435

Reviews:

Utax CD 1435, User Manual, Page: 172 / 250

Search results

Summary of Contents for CD 1435

Reviews: