manualshive.com logo in svg

Utax CD 1435, User Manual, Page: 39 / 250

Share
Download
Utax CD 1435 User Manual Download Page 39

Preparation Before Use 

2-15

2

Changing/Deleting Registration Contents

You can change the destination registered to a One-touch key to another destination, or delete the registration 
contents of the One-touch key.

NOTE: 

When changing the destination information in the Address Book, the information registered to the One-

touch key is updated.

1

Press the 

System Menu

 key.

2

Press [Edit Destination] and then [Register/Edit] of 

One-touch Key

.

3

Select the One-touch key number to edit (0001 to 
1000). Pressing 

Quick No. Search

 key or [No.] 

selects the One-touch key number by direct input.

4

Change Registration Contents.

When changing the display name

1

Press [Register/Edit].

2

Press [Change] in [Display Name] and enter 
the new display name.

When changing the destination to another 
destination

1

Press [Register/Edit].

2

Press [Change] of Destination, and select the 
new destination (contact or group). 
Press [Change] for the display name and clear 
the entered name with [Backspace]. When 
[Change] is pressed for the destination and a 
new destination is selected, the display name 
is automatically entered.
Pressing [Detail] shows the detailed 
information of the destination you have 
selected.

NOTE: 

You can rearrange or search for the 

destinations by destination name, group name, or 
address number.

3

Press [OK].

4

Press [Save]. 

Summary of Contents for CD 1435



























































































































































































































































Reviews:

No comments