DS1061-036A
7
1.3 SYSTEM
COMPONENTS
1.3.1 1061/006A
Control
panel
The control panel 1061/006A manages the whole system by means of a microprocessor. Its features and
performance are as follows:
No. of Zones for free
partial arming
No. of inputs for alarm detectors
(lines)
Alarm outputs no.
4
6
2 clean relay outputs
1 output for internal siren
1 output for self-powered external siren
•
220 ÷ 240V~, 50/60 Hz power supply, with 12 V backup battery.
•
Inputs configurable as balanced or fast (to connect directly the rolling shutter contact)
•
Up to 8 command devices, that can be freely chosen between electronic key or transponder key
readers (4 max) and keypads (4 max).
•
1 24H input (always active).
•
Up to 10 keys
•
Up to 10 codes, freely programmable (from 4 to 6 digits).
•
Free association of inputs to zones
•
Anti-theft function (with keypad only).
•
Technological input for technological detectors (smoke, fire, flood, etc.).
•
“Technological” alarm management (dedicated output in case of “technological alarm”).
•
“Emergency” alarm management.
•
Freely selectable entry and exit times.
•
1 delayed input.
•
LED on the control panel front side to display state/occurred events.
•
Capability to exclude each input by dedicated buttons on the control panel front.
•
Input automatic exclusion after 8 consecutive alarms.
•
Automatic exclusion of the open input at the activation time (function selectable by jumper).
•
Alarm events log (browsable with PC)
•
RS232-USB interface (optional).
•
Local or remote control panel programming by PC with application software.
•
PSTN telephone communicator (optional).
•
GSM module (optional).
•
Priority selection between PSTN/GSM, if in the control panel are installed both the modules.
•
Remote management (system state inquiry, with DTMF commands or PC and system activation with
DTMF commands).
•
Remote assistance (system parameters configuration and change).
•
Remote surveillance (alarm and signalling sending with numeric protocols: IDP – ADF – SIA).
