42
DS1061-036A
5.4.8
Codes programming menu
To acquire a new code, follow the instructions below:
•
Press
OK
button on motherboard.
•
Enter on the keypad a numeric code from 4 to 6 digits an confirm by pressing
OK
button on the
keypad.
•
In case of successful acquisition, the control panel LCD display blinks to confirm and a double
acoustic signal is emitted (beep beep) both in control panel and in keypads. The shown number is the
code identifier.
The control panel can acquire up to 10 codes.
5.4.9
Keys / zones association menu
When a key is acquired, it is automatically associated to all the zones and so it is necessary to disassociate
it from the zones where it must not be active. If needed, the key can be associated again to those zones
afterwards.
To disable a key, it is sufficient to disassociate it from ALL the zones.
