CHAPTER 1: DESCRIPTION
PHASEMASTER™ 6 DIRECT ENERGY WELDING CONTROL
990-083
1-3
Run State
In this State, the PM6 is ready to make a weld. If it is not executing a weld schedule, it is waiting for
either:
a The Footswitch to close (Air Actuated Weld Head); or
b The Force Firing Switch to close (Manually Actuated Weld Head).
The user can select, but not change, any weld schedule by using the
?
or
?
Keys on the Front Panel.
Program State
In this State, the PM6 will allow the user to change and save (write to permanent memory) any weld
schedule.
