PHASEMASTER™ 6 DIRECT ENERGY WELDING CONTROL
iv
990-083
SAFETY NOTES
This instruction manual describes how to operate, maintain and service the Phasemaster™ 6 .Direct Energy
Welding Control, and provides instructions relating to its SAFE use. A separate manual provides similar information
for the Weld Head used in conjunction with the Power Supply. Procedures described in these manuals MUST be
performed, as detailed, by QUALIFIED and TRAINED personnel.
For SAFETY, and to effectively take advantage of the full capabilities of the Weld Head and Power Supply, please
read these instruction manuals before attempting to use them.
Procedures other than those described in these manuals or not performed as prescribed in them, may expose
personnel to electrical, burn, or crushing hazards.
After reading these manuals, retain them for future reference when any questions arise regarding the proper and
SAFE operation of the Power Supply.
Please note the following conventions used in this manual:
WARNING:
Comments marked this way warn the reader of actions which, if not followed, might result in
immediate death or serious injury.
CAUTION:
Comments marked this way warn the reader of actions which, if not followed, might result in either
damage to the equipment, or injury to the individual if subject to long-term exposure to the indicated hazard.
