PHASEMASTER™ 6 DIRECT ENERGY WELDING CONTROL
990-083
iii
FOREWORD
Thank you for purchasing a Unitek Peco™ Phasemaster™ 6 .Direct Energy Welding Control.
Upon receipt of your equipment, please thoroughly inspect it for shipping damage prior to its installation. Should
there be any damage, please immediately contact the shipping company to file a claim, and notify Unitek Miyachi at:
1820 South Myrtle Avenue
P.O. Box 5033
Monrovia, CA 91017-7133
Telephone:
(626) 303-5676
FAX:
(626) 358-8048
e-mail:
The purpose of this manual is to supply operating and maintenance personnel with the information needed to
properly and safely operate and maintain the Unitek Peco Phasemaster™ 6 .Direct Energy Welding Control.
We have made every effort to ensure that the information in this manual is accurate and adequate.
Should questions arise, or if you have suggestions for improvement of this manual, please contact us at the above
location/numbers.
Unitek Miyachi Corporation is not responsible for any loss due to improper use of this product.
