23
SET PILOT BURNER IN OIL OPERATION
Use the cursor keys
to select
and confirm this with Enter
Change the ON/OFF functional state using the cursor keys
and confirm this with Enter
The display shows the "pilot burner in oil operation"menu "
Pilot burner in oil operation menu
1
Pilot burner in oil operation pictogram
2
Activate pilot burner in oil operation
3
Accept setting by pressing Enter
“Accept or discard the entry!”
Access level 2 is required to set this function!
CONFIGURATION OF ACTUATING OUTPUTS
Use the cursor keys
to select
and confirm this with Enter
Configuration of actuating outputs menu
1
Actuating drive position pictogram
2
Display channel 1, air
3
Display channel 2, combustible
4
Display channel 3, (off, air or actuator FGR)
5
Optional channel, off
CURVE SETTING OF ACTUATING DRIVES
Use the cursor keys
to select
and confirm this with Enter
If you keep key
pressed for more than 2 seconds in the menue "Curve setting of actuating drives" you will
cause a fault shut‐down.
AIR
GAS OFF
OFF
Summary of Contents for LAMTEC BT3 Series
