![background image](http://html1.mh-extra.com/html/hargrove/h-tube/h-tube_installation-and-operation-manual_3914686001.webp)
Installation and service must be provided by a qualified installer,
service agency or the gas supplier.
ADEQUATE FIREPLACE VENTILATION IS REQUIRED FOR SAFETY
READ INSTRUCTIONS FULLY BEFORE INSTALLING OR OPERATING
INSTALLER: LEAVE THESE INSTRUCTIONS WITH CONSUMER!
NOTE:
FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
WARNING: If the information in this
manual is not followed exactly, a fire or
explosion may result causing property
damage, personal injury or loss of life.
It is the homeowner’s responsibility to
assure their fireplace has adequate draft.
FOR YOUR SAFETY
WHAT TO DO IF YOU SMELL GAS
1. Do not try to light any appliance.
2. Do not touch any electrical switch; do
not use the phone in your building.
3. Immediately call your gas supplier from a
neighbor’s phone. Follow the gas
supplier’s instructions.
4. If you cannot reach your gas supplier,
call the fire department.
INSTALLATION AND OPERATION GUIDE FOR
HARGROVE
Glass H-Tube and
Stainless Steel “S” Burner
The gas appliance must be burned only in a fully vented, non-combustible fireplace with the
damper
completely open
and the chimney free of any obstructions or restrictions. The fireplace must be designed and
approved to burn wood.
The realistic yellow flame produces carbon monoxide and soot. Under normal conditions, these products are
exhausted up the chimney. If fumes or soot, from the gas burning, are evident in the room when the damper is
fully open it indicates that the fireplace draft is defective. Do not operate your gas appliance until the fireplace
draft is corrected.
1