43
Click up to quit the ignition position.
Check the combustion quality in all
positions (from minimum to
maximum output) and adjust the gas
and air setting if necessary (as
indicated on chapter “SETTING THE
IGNITION POINT WITH BURNER IN
STAND‐BY”).
Set the maximum load position 999,
according to the maximum output
required by the boiler. If necessary,
set the inlet gas pressure (at the exit
of the gas pressure reducer). Check
the output combustible and the
quality of combustion in all positions
and adjust gas and air if necessary
(see chapter “SETTING THE IGNITION
POINT WITH BURNER IN STAND‐BY”).
Press EXIT to quit the combustion
settings.
Press EXIT again to quit main menu.
GAS
AIR
GAS
AIR
GAS
AIR
GAS
AIR
Summary of Contents for LAMTEC BT3 Series
