20
The following sequence of events for confirming or discarding the entry is exactly the same for all parameter entries.
Therefore this process is no longer illustrated in detail in the following explanations for the parameter settings.
You will simply find this text: "
Accept or discard the entry!
"
SET DURATION OF POST‐PURGE
Use the cursor keys
to select
and confirm this with Enter
The display shows the "Duration of post‐purge".
1
Duration of post‐purge pictogram
2
Set duration of post‐purge
3
Accept setting by pressing Enter
Use the cursor keys
to select the number you wish to change .
Change the value of the number with the cursor keys
.
Confirm the entry with Enter
.
"Accept or discard the entry!"
LEAKAGE TEST FUNCTIONS
Use the cursor keys
to select
and confirm this with Enter
"Gas leakage" menu
1
Leakage test ON/OFF
2
Leakage test before ignition
3
Leakage test after ignition
4
Duration of leakage test
“Accept or discard the entry!”
Access level 2 is required to set this function!
Summary of Contents for LAMTEC BT3 Series
