Unify V3R3 Administration Manual Download

Page: 87 / 334

A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation

Administration

Security

3.4.5 Password Policy

Related Topics

•

Security

•

General Policy

•

Admin Policy

•

User Policy

•

Character Set

•

Change Admin and User password

3.4.5.1 General Policy

Expires after (days)

sets the maximum validity period of a password.

Warn before (days)

specifies when the user/admin is notified that his password

will expire.

Force changed

only affects the User password. When Force changed is

activated, the user will be forced to change his/her password at next login.

Tries allowed

specifies the maximum number of password entry trials before the

password is suspended. Values: 0 (no limits), 2, 3, 4, 5

No change for (hours)

specifies a period before a password is allowed to be

changed again. Value range: 0 to 99

Suspended for (mins)

defines how long a password will be suspended after the

number of failed retries has exceeded. Value range: 0 to 99

History valid for (days)

defines a period in days during which the history is valid.

Passwords no longer used are kept in history lists for the user and admin
passwords to prevent reuse of past passwords. This list is organised as FIFO
(First In, First Out) so that it always contains the latest passwords.

Administration via WBM

Security and Policies > Password > Generic Policy

Summary of Contents for V3R3















































































































































































































































































































































Search results

Summary of Contents for V3R3

Reviews:

Related manuals for V3R3

Brands by name

Popular brands

Unify V3R3, Administration Manual

Search results

Summary of Contents for V3R3

Reviews:

Related manuals for V3R3

Brands by name

Popular brands