A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation
187
Administration
Multiline Appearance/Keyset
The information shown to the user depends on the ring/alert configuration for the
line in question. If the line is configured to alert only, the preview will only show
the state of the call, not the identity of the calling party. If the line is configured to
ring, the identity of the calling party will be revealed.
The preview mode can be configured as temporary or as permanent. If
System
> Features > Keyset operation > Preview mode
is disabled, preview mode will
end when the user uses the previewed line, or a new call is started in any other
way, or if the focus is changed away from call view. If the parameter is enabled,
preview mode remains active until the user cancels it by pressing the key again.
The
Preview timer
parameter determines the time span during which the line
preview will remain on the screen.
The Bridging priority parameter affects the behavior of the line key (see
Preview
and Preselection
). Precondition: Bridging is enabled (see
Configure Keyset
Operation
)
Data required
•
Preview mode
Value range: "Yes", "No"
Default: "No"
•
Preview timer: When Preview Mode is set, the timer controls preview.
Value range: 2, 3, 4, 6, 8, 10, 15, 20, 30, 40, 50, 60
Default: 8
•
Bridging priority
Value range: "Preview overrides bridging", "Bridging overrides preview"
Default: "Preview overrides bridging"
Administration via WBM
System > Features > Program keys > Preview
Related Topics
Related Topics
•
Multiline Appearance/Keyset
•
Preview and Preselection
3.11.4.1 Preview and Preselection
Precondition: Bridging is enabled