A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation
21
Startup
Assembling and Installing the Phone
Write your phone number and the emergency numbers for the fire and police
departments on the included label and attach it to the telephone housing
where applicable, e.g. underneath the handset.
Related Topics
Related Topics
•
Assembling and Installing the Phone
2.2.4 How to Connect the Phone
Step by Step
1)
Plug the LAN cable into the connector
at the bottom side of the telephone
and connect the cable to the LAN resp. switch.
a)
If PoE (Power over Ethernet) is to be used, the PSE (Power Sourcing
Equipment) must meet the IEEE 802.3af specification.
INFO:
The required power supply for the OpenScape Desk
Phone must comply with the Power Consumption/Supply Class 2.
b)
Only if Power over Ethernet (PoE) is
NOT
supported, you have to use the
optional plug-in power supply:
INFO:
The order no. for the plug-in power supply is region-
specific:
- EU: C39280-Z4-C510
- UK: C39280-Z4-C512
- USA: C39280-Z4-C511
Plug the power supply unit into the mains. Connect the plug-in power
supply unit to the
jack at the bottom side of the phone.
2)
If applicable, connect the following optional jacks:
•
LAN connection to PC
•
Headset (accessory)
Related Topics
Related Topics
•
Assembling and Installing the Phone