Administration
A31003-D3000-M100-02-76A9, 11-2013
182
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation
Multiline Appearance/Keyset
The
Rollover ring
setting will be used when, during an active call, an incoming
call arrives on a different line. If "no ring" is selected, the incoming call will not
initiate a ring. If "alert ring" is selected, a 3 seconds burst of the configured ring
tone is activated on an incoming call; "alert beep" selects a beep instead of a ring
tone. "Standard ring tone" selects the default ringer.
LED on registration
determines whether the line LEDs will be lit for a few
seconds if they have been registered successfully with the SIP server on phone
startup.
The
Originating line preference
parameter determines which line will be used
when the user goes off-hook or starts on-hook dialing.
INFO:
When a terminating call exists, the terminating line
preference takes priority over originating line preference.
The following preferences can be configured:
•
"idle line": An idle line is selected. The selection is based on the Selection
order parameter assigned to each line (see
Line Key Configuration
).
•
"primary": The designated Primary Line/Main DN is always selected for origi-
nating calls.
•
"last": The line selected for originating calls is the line that has been used for
the last call (originating or terminating).
•
"none": The user manually selects a line by pressing its line key before going
off-hook or by pressing the speaker key, to originate a call.
Manual line selection overrides automatic line preferences.
The
Terminating line preference
parameter decides which terminating line, i. e.
line with an incoming call, is selected when the user goes off-hook.
The following preferences can be configured:
•
"ringing line": The line in the alerting or audible ringing state is automatically
selected when the user goes off-hook. In the case of multiple lines alerting or
ringing, the lines are selected on the one that has been alerting the longest.
•
"ringing PLP": The line in the alerting or audible ringing state is automatically
selected when the user goes off-hook. However, if the prime line is alerting, it
is given priority.
•
"incoming": The earliest line to start audible ringing is selected, or else the
earliest alerting (ringing suppression ignored) line is selected.
•
"incoming PLP": The earliest line to start audible ringing is selected, or else
the earliest alerting (ringing suppression ignored) line is selected. However, if
the prime line is alerting, it is given priority.
•
"none": To answer a call, the user manually selects a line by pressing its line
key be-fore going off-hook, or by pressing the speaker key.
Manual line selection overrides automatic line preferences.
Line action mode
determines the consequence for an established connection
when the line key is pressed. If "hold" is selected, the call currently active is set to
hold as soon as the line key is activated. The user has two options: 1) to
