manualshive.com logo in svg

Unify OpenScape CP700, User Manual

The Unify OpenScape CP700 Quick Reference Card is a must-have manual for users of this cutting-edge device. It provides clear and concise instructions to maximize its capabilities. Download this helpful guide for free from manualshive.com and harness the full potential of your Unify OpenScape CP700.

Share
Download
background image

204

Opening the door without receiving a call

Prerequisite

: The functionality has to be enabled by your administrator.

When you have configured a programmable key to open the door, you can press 
the relevant Softkey to open the door for your visitor without receiving a call from 
the door phone.

Press the Function key in the left panel or on a connected OpenScape Key Mod-
ule 600 to which the Door opener function has been assigned.

or

If you have used a Function key in the Favorites menu:

@

Press the Main Menu key, if needed.

Open using the Softkey.

Select the desired page (1 to 2).

Press the Function key to which the Door opener function has been assigned. 
The door opens. In case there is a problem with the communication with the 
door, you will see a pop-up message on your device screen.

Receiving a call from the door phone 

Prerequisite

: Door opener has been configured by your administrator. If you 

have a door phone with an embedded camera, direct video has to be enabled 
by the administrator too.

If the service engineer has set up a door phone and your administrator has con-
figured it, you can speak to the visitors and activate the door opener from your 
OpenScape CP700 phone

.

When someone rings the door bell, you will receive an incoming call from the 
door.

DoorOpener 1

_

Favorites

_

Favorites (1/2)

Page 1

Q

_

DoorOpener 1

_

Summary of Contents for OpenScape CP700




















































































































































































































































Reviews:

No comments

Related manuals for OpenScape CP700

Olitech Easy Mate 3G Instruction Manual preview
Easy Mate 3G
Brand: Olitech Pages: 12
QUO INFINITY P1 User Manual preview
INFINITY P1
Brand: QUO Pages: 28
NEG F1020 User Manual preview
F1020
Brand: NEG Pages: 10
Polycom VVX 501 Series User Manual preview
VVX 501 Series
Brand: Polycom Pages: 2
AT&T SPAREONE User Manual preview
SPAREONE
Brand: AT&T Pages: 37
Meriam MFC 4101 HART Operator'S Instruction Manual preview
MFC 4101 HART
Brand: Meriam Pages: 31
Teldat elmeg IP130 User Manual preview
elmeg IP130
Brand: Teldat Pages: 165
OfficeServ SOHO WIP-5000M Quick Installation Manual preview
SOHO WIP-5000M
Brand: OfficeServ Pages: 63
Mobistel Cynus T7 User Manual preview
Cynus T7
Brand: Mobistel Pages: 24
M4 SS4452 Quick Start Manual preview
SS4452
Brand: M4 Pages: 19
ATCOM Rainbow1 User Manual preview
Rainbow1
Brand: ATCOM Pages: 41
Blackberry Rogers User Manual preview
Rogers
Brand: Blackberry Pages: 17
Eon Digital Telephones User Manual preview
Digital Telephones
Brand: Eon Pages: 4
Sonim XP5520 Bolt User Manual preview
XP5520 Bolt
Brand: Sonim Pages: 89
Samsung SM-A057G Repair Manual preview
SM-A057G
Brand: Samsung Pages: 126
Samsung SM-A107F/DS User Manual preview
SM-A107F/DS
Brand: Samsung Pages: 119
Samsung SGHT589R User Manual preview
SGHT589R
Brand: Samsung Pages: 32
Samsung SGH-M140L User Manual preview
SGH-M140L
Brand: Samsung Pages: 26

Brands by name

Popular brands

Load more brands