Unify OpenScape CP700 User Manual Download Page 111

Page: 111 / 243

111

Dialing from conversations

The conversations list is displayed on the screen. If the contact you want is not
visible, then select with

€

or search by entering the phone number or name.

Confirm the selected contact with the Softkey. The phone number is dialed.

If visible, confirm immediately with the Softkey for the contact. The phone num-
ber is dialed.

Dialing with the selected dialing key

Prerequisite:

You have saved a call number on a selected dialing key



page 98.

If necessary switch to another level on an optionally connected OpenScape Key
Module 600.

Press the key with the saved number in the left panel or on OpenScape Key
Module 600, if such a key has been configured.

Redialing

From the conversation list

You can use conversation list to call your last connected party. You can do this
via the history of a conversation (for more information, see ”Display the history
of a conversation”



Page 50) or via contact details (for more information, see

”Opening details of a conversation or conducting a call”



Page 38).

Via the fixed redial key

You can also call your last connected party via the Redial key.

Redial is the default function assigned to the key, unless otherwise configured
by your administrator.

Press the redial key.

Georg Simon Ohm

- O

Georg Simon Ohm

Party B

You can also confirm the selected dialing key during a call, which will au-
tomatically start a callback



page 126 .

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands

Unify OpenScape CP700, User Manual

Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands